Lord of Change
Warhammer 40k

Cosplayer: Clockwork Dandy Noodles

Status: Complete

Condition: Not Set

Ecg qualifier season 5 solo

Showcased 9th November 2015

29th April 2015: April review April was a month where everything that could go wrong just did. I had hardly anytime to work on the project. I got things moving and did finish a few bits. However theres not much time and theres still a lot outstanding.
May will hopefully see the completion of the sash/ breast plate/skirt and maybe at a push the jacket top. I hope to work also on the robe tail section/ staff/ feathers and final belt. Leaving for June hopefully to fix the bad issues with the pauldrons and the head. And than June/ July for props and neatening everything. Its huge and theres a chance those aims won't be met. But I am trying the best I can to do as much as I can around work.

1st April 2015: March Review I managed to get a start on most of the sections during March. I finished her bag and managed to start putting the robe top together. The sword is nearly done but it needs paint and aging etc.
Hoping this Friday to have the beaks painted up and then finally get the head underway, I got the base all set up. Going to do Balaclava method + some canvas material. I used some of my fosshape to make a cap, this means I won't have to worry about the heads final fit.
Pauldrons are almost there, I need to sort out how they will sit on me and once thats all done yay!. I am redoing the breastplate now in Critter clay and then just using worbla to get a cast... fingers crossed I can remove the clay after.
Staff has been planned out and the belts planned. Everythings ready to go but I am stuck waiting for materials and things to get sorted out.
By the end of April sword - pauldrons - possibly skirt - dangles and belt may all be done... if I am lucky. I am not on target and will not be attending May with this costume. I see no point in rushing.
I am planning to take her to Hyper and Manchester to have some stage fun and try my luck with qualifying for something... but I am not confident.
I am simply looking forward to having fun in this costume =D

1st March 2015: Demould Argh today was the scary task of demoulding ... it was my first ever time doing this method so I was nervous. I was also convinced the bottom print layer would look horrid. So I didn't have high hopes....
So I started by dislodging the frame wires and taking the beak of the head.
That went ok I started crumbling some of the clay to make it easier. But as I got a few inches in I noticed the print layer was looking oddly clean.
So I used the demould spray down the edges. I had to take the thin layer of mod rock of because tbh... it was making things so hard. Once gone I took a scalpel and cut down the outside of the beak length.
That went ok and cut easier than I predicted, I stopped at the key so I didn't wreck the beak tip.
I was able to lift the clay out easy as pie.
And boom... I was left with a clean smooth printed negative of the beak. I am so dam proud of myself for keeping at this. All I have to do now is resilicone the seam. The add a duct tape mini mother mold and then add in the resin.
Resin is ordered <3 and the entire resin method I have ensured is committed to memory. The lower beaks sculpted so that goes through the same silicone process.
Fingers crossed.

27th February 2015: Feb review Oh man, time is going so fast. I have fallen miles behind which sucks, but it just means I need to put more hours in.
The sword is all in one piece, its a good weight, it needs neatening etc and filling blah blah. But its all there.
The beak is in the mould, I need to reconsider how to demould and then go full on with the mother mould. I am slush casting the beak. So once I have the mould I can knock the beak of and make up the lower beak and repeat the cycle. This decision has added a lot to the budget.
All the fabric is bought and in now, bar the silk for the ombre.
The wave patterns is embroidered but it needs outline that took a total of two weeks.
Everything is hand stitched so things take a great deal more time. I am hoping by the end of March the sword will be finished, the beaks cast maybe. And I want to begin on the robe tops. The Pauldrons will be next when it comes to big section concentration.
The breast plate is now gray zoned as its pretty much beyond repair... so I need to rethink that, but I am a bit upset about it. So thats on the back burner till more of the project is done.
So yay onward and I hope in a month I can tick of the aims I set here.

19th February 2015: Mould time Argh! that scary time is upon me... I went from looking at a foam method to throwing myself in at the deep end and adding to the casting pile.
So the beak was built up over a wire frame, this was easier for me to monitor shape and scale. It also saves on clay. I used the odd stuff my parents bought me for xmas when I actually asked for my usual stuff. But it impressed me, It dried nicely but was a bit annoying to work with. I found most of the nice details occured once it hit leather hard.
After it was dry to stop it breaking and becoming brittle, It was coated in wood adhesive, best decision ever. Its rock solid, smooth with nice brush stroke textures where needed.
I have ordered in a two part silicone as the stuff I really wanted does not deliver to the Uk.Booo hiss.
I have also bought a thickener as I need to mould a upright item.
I am opting for a slush casting and the resin I have ordered in is <3 the stuff I have wanted for ages. I splashed out and it hopefully will not disappoint. I have devised a timed method to get the actual casting correct. Fingers crossed this goes to plan.
The breast plate is fully dried, I did encounter the nightmare drying traits WED clay is renowned for in the end. I patched up in polyfilla. The next step is to neaten and coat. I will be using a slightly different method in casting the breastplate itself.
I am nervous but excited.
I am still behind time but hopefully once this is all out of the way I may be back on target.
I also have decided how the two plate sections will connect and have opted for a beautiful corset lacing method as I will be able to drill holes in the plates.
I have made my own braid and will be wood burning some wooden beads which I will make from scratch. I was thinking of adding this design to them. * Tzeentch chaos symbol*
The braids will also have feathers on the ends to top the look.

10th February 2015: Sword attempt 2 Right from the start, I noticed the hilt of a second weapon behind my character. This is out of character for a Lord of Change, most are spell users and only have the giant ornate staffs. So I was puzzled with how to proceed. My original sword choice was from a similar model drawn by the same artist. However in the making process things didn't seem to click I love the work I did on the hilt... but that was about it.
So I hit the lore books again and studied around. I was looking for a chaos unit who used both swords and the giant staffs, similar to what the image suggests my LOC does.
When boom I hit the jack pot with a chaos unit. The same artist had worked on this solider Tcharzanek, the length of the hilt makes it possible to change the chaos symbol for the one seen in the image easily. It would make sense for her to use a blade similar to this, for one the design is more Tzeentch by miles. The prototype was too neat.... yay difficulty slowly increasing.
Again however I stand by my earlier theory that this blade would be used in last resorts and for more ceremonial uses. Because the LOC are such highly competent sorcerers and due to their large size, having the second weapon as an offensive weapon makes no sense.
So I did some work on scaling this sword up and making the template minus the hilt section.
I will use the same methods for the hilt as I was 100% happy with the prototype results, however blade wise because of how fiddly and unstable this could turn out. I have decided to use sintra and wood core, the concave and rounded sections will be EVA. And thus lastly I may coat the entire thing in worbla depending on how it looks prior. I have spare resin gems I can use for the eyeball.
It reminds me of when I was making soul edge, so hopefully this will put some of that experience to good use.
The hands are nearing completion with just paint work and finish left to be done. I ran the talons through 280/400/800/1000/1200 grit papers, and also worked the gesso in between to gain a really nice smooth canvas for the paint to go down on.
Some of the recesses are more rougher and textured which I like because it looks more realistic.
Fingers crossed the next stages go smoother.

6th February 2015: Feb project aims I fell behind last month, so this month I want to work more productively around my job. I have sculpted the breast plate and I am now in the nail biting process of slow drying it. I will do the back plate once the first plate is dry.
I want to get the hands done by the end of the month, I have begun work on the second hand and need to dremel the second talon set like the first.
Also note to myself, continue finishing the first set of talons as they look a tad messy.
Sash wise I will hopefully have the turquoise and pattern section sorted by the end of the month and maybe more there.
I want to start mocking up the head and also belt buckle pieces.
I am really behind and now dislike the sword progress so may rework if time at the end, the original idea of having a ceremonial dagger suits her better.
So far not bad, not fully happy but I will try and up my game.
Attached image of one of the talons from the first set, contours have been dremeled in so now they need to have a date with my sandpaper collection.

25th January 2015: Progress so far and Jan review I fell behind schedule in places, but I made the most of what time I had. Because of monthly pay, unlike previous projects where everything was bought at once. I am setting goals for each month and only buying stuff for the those goals.
So this month I didn't finish a section. But the fabric painting on the skirts sorted and I am really pleased.
I have sorted my sash pattern, so that now means everything, minus a couple of sections is fully planned out and ready to go! I made a start on the hands and have gotten to the point where without buying anything more I am at a halt. I have the right hand base coated and all ten talon bases made up.
I found dremeling helped get the contours, but sanding and a little heat helped neaten and get the final shapes sorted.
I am now waiting for pay day where I can buy in some adhesives such as spray and more e6000. I was contemplating using my worbla scraps to help adhere the talons to the muscle bases. But I am not a fan of the stuff so may see if I can get away with some good adhesives and build up the muscles.
I hit some problems with the initial plan to heat transfer the designs for the sash. But after tons of research I am now proceeding with a half altered plan. I will heat transfer the gold sections, however will use a white fabric coat base to pop the metallic blue section and add in the finer detailing.
GAHHHH so much to do, every section is so complex I am really nervous now as to whether I can get the whole thing finished and uniform.
I will write up Febs review in a week'ish.

19th January 2015: Stage Prop experimenting research As I have not a great deal which I can actively proceed with. I took tonight as a chance to experiment. I have my audio all mixed and the performance plan blocked. However to pull it off I have a few stage props I will be trying to make.
But those are secret for now, however before I buy the expensive material which I will use for the proper things. I found a cheaper material which is similar. The oasis green block often used in flower deco. Its not great for final items and its very very crumbly, unlike what I will eventually use. But this has given me some cool results and also interesting experience. I have attached a mock tudor building wall haha, as this was the first thing to pop into my head when messing around.

2nd January 2015: Progress so far and Jans plan Project so far is of to a smoothish start. I focused mainly on getting the base sections done in December. So I have the undershirt all done, leggings are done, glove bases all sorted and patterns for numerous sections all mocked up.
The feet are completed for now. I wanted those out of the way as they are not fully on my main reference, however they are a trait the species all have.
They look nice and I am 70 percent happy, If I wish to redo them it will have to happen once I know I have time to do so.
So Jans plan hopefully should be this.
- Breastplate sculpting and resin casting
- fabric painting the flames onto the stone colour section of the skirt.
- Attaching the celtic trim to the bottom of skirt
- Order in fabric for the jacket and locate the gold for the sash
- And if time this month finish the sword

My research is going well, but I have a small problem list forming.
- Notes to self - Please research into circuits more and also consider Pileruds advice. Even though I know worry that advice won't work if I alter my head method.
Oh also..... DONT PANIC

The_Deadly_Unicorn avatar

The_Deadly_Unicorn - 8th December 2014
This is looking really intense! Cant wait to see it finished :)

Unknown member avatar

Anonymous - 25th December 2014
Love those shoes!

madmazda86 avatar

madmazda86 - 2nd January 2015
Boots are looking very good, will look forward to seeing this!

WhiteWraith avatar

WhiteWraith - 2nd January 2015
This is looking amazing, all the detailing is fantastic. Looking forward to seeing it complete :)

ArcaneArchery avatar

ArcaneArchery - 5th January 2015
You certainly picked the most complex of the greater daemons but judging by the feet/talons the finished costume will be amazing.

Clockwork Dandy Noodles avatar

Clockwork Dandy Noodles - 5th January 2015
This is going to be a massive challenge for me, but I am really hoping I can pull this one of. I collect Chaos daemons and I love the Lords of Change, fingers are crossed! :D

Bambi. avatar

Bambi. - 5th February 2015
Oh my goodness! *___* Best of luck with this! :D

Sephirayne avatar

Sephirayne - 5th February 2015
Wow! The progress on this is amazing.

Decora avatar

Decora - 15th March 2015
Looking good! <3 Certainly showcase material - and I can't wait to see at Manchester MCM!!!

cowiee avatar

cowiee - 5th June 2015
oh my goodness! This is all looking fabulous! Continue to great work! c:

Kei Lin Sama avatar

Kei Lin Sama - 13th June 2015
Beautiful progress! You're nearly there! Keep at it!

Manjou avatar

Manjou - 5th July 2015
Been keeping an eye on this costume, if I ever see this costume at a con I will high five you being as crazy as I am XD

Siouxsie James avatar

Siouxsie James - 18th July 2015
The progress is amazing. Can't wait to see it finished :)

ArcaneArchery avatar

ArcaneArchery - 6th August 2015
I've been following this since you started and I've got to say that the completed costume is spectacular.

TheStarlightFairy avatar

TheStarlightFairy - 30th September 2015
This cosplay is just on another level *___* congratulations on the ECG prelims, I can't wait to see what you do for the finals <3

Clockwork Dandy Noodles avatar

Clockwork Dandy Noodles - 30th September 2015
Thank youuuu all for the kind comments and the support throughout the past year working on this <3
I really hope I can up my game and bring one hell of a performance to Japan expo next year <3
<(*_*)> this costume taught me so much.

Siouxsie James avatar

Siouxsie James - 15th November 2015
Amazing costume!!

Sephirayne avatar

Sephirayne - 4th December 2015
This is so epic. Well done on the showcase.