Login or register to post.
Login to reply  Page: « < 1 of 1 > »
16 Jan 2013 - 03:3095987
HELP! Viewtiful joe cosplay
If you look at the I con for my VJ cosplay you can tell I'm using a green sprite bottle cut out for the visors, it's been hurting me, I don't like the markings of the bottle so I'm looking for a new material. Hopefully someone can answer this if not, thankyou for reading, btw if you look t he picture, yes the helmet is damaged, I'm going to relayer it and make it smooth then paint it


16 Jan 2013 - 03:3795988
Are you securing it to something? you could use acetate which is basically just over head projector sheets but would need to be reinforced as it's just like thin car or there's perspex/acrylic sheets. http://www.ukcardcrafts.com/ourshop/prod_1361450-A4-Green-Acetate-200-Micron-x-5-Sheets-UKCC0230.html Something like that or this http://www.ebay.co.uk/sch/i.html?_sacat=0&_nkw=green+acrylic+sheet&_frs=1


16 Jan 2013 - 04:3795989
Thanks
This is gonna help, i hope i can do this iconic character justice


21 Jan 2013 - 13:1496221
In Sheffield, at the bottom of the moor there's a Wickes. If you manage to get on the other side of the dual carriageway there's a shop called Pinders.

There you can get Green Acetate sheets in A4 and this should be good for what you need it for. It's a little flimsy so I would suggest making a frame to hold it steady at the edges.


Login to reply  Page: « < 1 of 1 > »