Costume :Feral Chaos
Source :Final Fantasy Dissidia 012
Progress :Complete
Worn At :London MCM Expo Comic Con May 2014

Costume Photos

I will seek to wreak heaven's doors

To The Abyss

For an Eternity

Welcome to the End

Endless Chaos

Sorrow Never Ending

Prey on the Weak

Gods are Warring

God of Discord

Ultimate destruction

God in Fire


Costume Information

Revealed! It was Feral Chaos! Still needs some work, but I'm really proud of this cosplay!


Avatar Image

Will be interesting what this will turn out to be

by HorrorFanatic85 on Thursday, 8 May, 2014 - 15:47
Avatar Image

I was really shocked to find out this was you! You are normally so beautiful (e.g. your Belle last year), but this time you transformed into a fierce and demonic beast! Epic!

by Kei Lin Sama on Friday, 30 May, 2014 - 22:43
Avatar Image

This is a very impressive costume, especially the sculpted demon faces

by ArcaneArchery on Sunday, 1 June, 2014 - 13:19

Shopping List

2kg of Newplast£14.96Bought
Upholstery foam 60x20x2"£16.44Bought
5m of Black Felt£25.95Bought
100m Fishing Wire£3.25Bought
50m of Duct Tape£2.28Bought
More Paperclay 16oz£13.50Bought
Foam Mat£4.49Bought
Heeless Shoes£6.99Bought
Sculpting Tools£4.44Bought
Nuts and Bolts£2.58Bought
2x 3m long pvc pipes£4.96Bought
6m of Modroc£1.00Bought
16oz of Paperclay£14.40Bought
112g of transparent Fimo£4.58Bought
1.5kg of EVEN MORE Newplast£8.97Bought
2 MORE kg of Newplast£15.96Bought
Casting Plaster£11.25Bought


Shoes (Posted 19th May 2014)

Building up the shape with felt and tape

Foam Attack! (Posted 19th May 2014)

Attacking my shoes with expanding foam so I can carve the feet out later.

time to get plastered (Posted 18th May 2014)

It's plaster time!

Knee Faces (Posted 17th May 2014)

Moar sculpting, using thin metal wire to support the longer teeth/fangs

Second wing (Posted 17th May 2014)

Now to paint!

Updated Loin cloth (Posted 16th May 2014)

Made to look more ragged and a more appropriate size

Much less of a wing (Posted 16th May 2014)

Oh dear . . .

WINGS! (Posted 16th May 2014)

Well, the beginning of one. Using felt so I can cut holes out of it.

Demon Crotch Face (Posted 16th May 2014)

One face painted, man I suck at painting flames.

Adding the claws (Posted 16th May 2014)

Beginning to shape the hands by adding craft foam claws.

Anyone need a hand? (Posted 15th May 2014)

Cause bitch I got several.

Making arms! (Posted 15th May 2014)

Aww yeeeeeee. First I covered my arm, shoulder to wrist, with cling film, then I covered that with several layers of parcel tape and cut it off and taped it back together. Then, I put on a glove, taped over that, cut that off, taped it together and then taped the hand to the rest of the arm.

Loin Cloth (Posted 15th May 2014)

Simply made by attacking a piece of suede with scissors and sand paper

Dummy! (Posted 14th May 2014)

Went to a friend's house and they helped make me a MINI ME!

Wing Movement (Posted 11th May 2014)

I can control the movement via some fishing wire. The wire will be visible but eh, I cba. I did attempt to make a system than hid the wire but it didn't work.

Shaping the wings (Posted 10th May 2014)

Attacking them with a hairdryer and tinfoil seems to have worked just fine.

Shoes (Posted 9th May 2014)

First, I needed rid of that toe peep hole thing, so I put a bit of felt over it and taped it down with duct tape.

WHAT THE HELL (Posted 8th May 2014)

So I bought heeless shoes to build feet around, but they're f*cking weird.

Ruby #2 (Posted 7th May 2014)

I tried using the translucent fimo again but this time much thinner, and it still didn't work. But, this close to expo I'm sticking with it.

Get bent (Posted 6th May 2014)

Heat forming the bends in the pvc pipe using my hairdryer and some tinfoil.

Demon Face (Posted 6th May 2014)

Smaller face is the prototype, the bigger one is much better. Made from paperclay for lightness.

Eyebrows (Posted 29th April 2014)


Ruby Red (Posted 24th April 2014)

I tried to make a ruby out of translucent fimo, but I made it far too thick, it's not translucent at all. I would use resin but the price is nope. Back to the drawing board.

Better Joints! (Posted 19th April 2014)

This is much better! I heated the end of the smaller pipe and flattened it a little, before putting a bolt through the holes meant for the MDF! Now I need to rig it up so I can control movement.

Basic layout done (Posted 18th April 2014)

Will be sorting out those MDF joints tomorrow.

Attaching the larger pipes (Posted 18th April 2014)

Attempt number two (one isn't shown, I tried to screw diagonally through the two pipes, it did NOT go well)
The smaller pipes have been shortened ans a small block of MDF is being used to attach them. However, I don't like how this looks so I'll be trying something different.

Backplate (Posted 18th April 2014)

Using an offcut of MDF from Edea as my backplate, I drilled two holes through the wood and the pipes to ensure security and stability. Also, by using nuts and bolts, I can remove the wings from the backplate for ease of travel (and bathroom breaks).

Y M C A (Posted 18th April 2014)

Otherwise translates as let's start this wing framework. I cut my 3m pipes down into two pipes each, one 2m long and the other 1m long.

RRRARRRGH (Posted 17th April 2014)

Starting to take shape

More sculpting (Posted 17th April 2014)


Sculpting (Posted 16th April 2014)

This is taking forever

It begins (Posted 14th April 2014)

Slowly attacking my poor long suffering polystyrene head, Alonzo with newplast clay. This'll be the basis of the head.